The DataSwitch Model 100 Contact Bounce Tester measures both make and break contact bounce times on any membrane switch with reliability and accuracy.
MODEL 100 CONTACT BOUNCE TESTER SPECIFICATIONS | |
| Resolution | 0.01 Milliseconds |
| Test Range | 0-99.9 Milliseconds |
| Accuracy | 5%+0.02 Milliseconds |
| Power Requirements | 110 VAC 60 Hz 220 VAC 50 Hz upon request |
3-Step Operation
1. Connect the clip cable's two test leads to your membrane switch traces.
2. Press and hold the keypad being tested. Read the bounce time LED display.
3. For break - bounce time, release the key and read the new LED display
STANDARD FEATURES OF MODEL 100 CONTACT BOUNCE TESTER
• Measures and displays bounce times from 0.01 Millisecond to 99.9 Milliseconds.MODEL 100 CONTACT BOUNCE TESTER PURCHASE INCLUDES
• Longer bounce times are indicated by an error light.
• Does not require specially trained operator.
• One Electronics Unit
• One Clip Cable
• One Power Supply
• One Year Warranty
DataSwitch Continuity Testers deliver the speed and ease of use required for a production-line environment, plus the versatility and accuracy needed for engineering research. 
The DataSwitch Life Cycle Tester will test switch keys individually at a rate of one million strokes in approximately 48 hours. The switch is placed under an electrical load of 5 Milliamps DC, and is checked twice during each test cycle: once for resistance level during the 'down' stroke, and once for shorts during the 'up' stroke. Dual counters store the number of good cycles as well as the number of bad cycles (or misses). 
The DataSwitch Contact Bounce Tester measures both make and break contact bounce times on any switch with reliability and accuracy beyond that of an oscilloscope. This tester measures and displays bounce times from 0.01 milliseconds to 99.9 milliseconds. Longer bounce times are indicated by an error light.
The DataSwitch LED Tester accurately tests embedded LEDs for function and correct polarity with minimal set-up time. It will handle membrane switches with tails of up to 25 trace lines. 
Close-up of pressure regulator used in the Model 2100's Mechanical Fixture Plate. 
Our unique family of membrane switch testers and components allows you to customize your test equipment to perform exactly as you need it to. Each component can be integrated for use with our core products and accessories. 
Our products are quick and simple to set up. Although each product comes with a detailed, easy-to-understand instruction manual, our intuitive equipment works so efficiently that you will need to do little more than plug it in and turn it on.